How to How to Install Ceiling Light
Installing a ceiling light fixture updates your room's look and lighting. Learn proper wiring, mounting techniques, and safety procedures for a professional installation.
Your Progress
0 of 6 steps completedStep-by-Step Instructions
1 Step 1: Turn Off Power at Breaker
Mike Johnson: "Pro tip: Make sure to double-check this before moving to the next step..."
Step 1: Turn Off Power at Breaker
Switch off the circuit breaker for the ceiling light. Use a voltage tester to verify power is off before touching any wires.
2 Step 2: Remove Old Fixture
Mike Johnson: "Pro tip: Make sure to double-check this before moving to the next step..."
Step 2: Remove Old Fixture
Unscrew the old fixture and carefully lower it. Disconnect wires by unscrewing wire nuts. Note how wires were connected.
3 Step 3: Install Mounting Bracket
Mike Johnson: "Pro tip: Make sure to double-check this before moving to the next step..."
Step 3: Install Mounting Bracket
Attach the new fixture's mounting bracket to the ceiling box using provided screws. Ensure it's level and secure.
4 Step 4: Connect Wires
Step 4: Connect Wires
Connect black (hot) to black, white (neutral) to white, and bare copper (ground) to green or bare wire. Use wire nuts and tape.
5 Step 5: Attach Fixture to Bracket
Step 5: Attach Fixture to Bracket
Carefully tuck wires into the ceiling box. Mount fixture base to bracket and secure with screws or decorative cap nuts.
6 Step 6: Install Bulbs and Test
Step 6: Install Bulbs and Test
Install appropriate bulbs per fixture specifications. Restore power and test operation. Check for flickering or buzzing.