Your Progress
0 of 6 steps completedStep-by-Step Instructions
1 Step 1: Identify Power Window Problem
Step 1: Identify Power Window Problem
Determine if window won't move, moves slowly, or makes grinding noise.
2 Step 2: Check Window Fuse and Switch
Step 2: Check Window Fuse and Switch
Test fuse with multimeter, try window from master switch to rule out bad window switch.
Digital Multimeter
Voltage tester for checking fuses and electrical
$24.99
Window Switch
Replacement power window switch
$34.99
3 Step 3: Remove Door Panel
Step 3: Remove Door Panel
Take off interior panel to access window regulator and motor assembly.
Door Panel Removal Tools
Pry tools for removing door trim safely
$14.99
4 Step 4: Test Window Motor
Step 4: Test Window Motor
Apply 12V directly to motor - if it runs, motor is good and regulator/switch is bad.
Window Motor
Replacement power window motor
$54.99
5 Step 5: Inspect Window Regulator
Step 5: Inspect Window Regulator
Check regulator cables/gears for damage - replace if broken or stripped.
Window Regulator Assembly
Complete regulator with motor for your vehicle
$89.99
6 Step 6: Lubricate Window Tracks
Step 6: Lubricate Window Tracks
Clean and lubricate window channels with silicone spray for smooth operation.
Silicone Spray Lubricant
Lubricant for window tracks and weatherstripping
$9.99